Adam Mitchell's Nissan V8-powered 1964 Ford Compact Fairlane, shot in New South Wales last year. Adam was good enough to contribute a set of tyres to this shoot. He didn’t need much persuading…
Read More
Late last year we made the pilgrimage to Yokohama for the 27th Annual Hot Rod Custom Show hosted by Moon of Japan…
Read More
Juan and Jesus Espinoza run Deadend Magazine from their hometown of Salinas, California. In this film, we spend a day with the brothers both at their store in Salinas and out on a photoshoot.
Read More
Kyle Smith from Smith Concepts in Sydney shows us around 'Brain Fade', his 1930 Ford Model A Tudor hot rod.
Read More![Outkast | 1955 Chevrolet Bel Air Gasser [With Video]](https://static1.squarespace.com/static/562ff836e4b05cda5f7ab9a5/5636e82fe4b06c8363f41110/5b0f85b303ce6436bf011878/1527760481641/_RAY9560+-+Copy.jpg)
I’ve known the guys at the Outkasts Car Club for a while now. Whenever I make a road trip up to Sydney for content, I can always rely on these guys to offer up some fresh meat.
Read More
In part five, Andy shows us the final outcome of all the hard work he and his team have been doing over the last few months.
Read More
Dallas Augustine runs Ranch Cycles in Kinglake, Victoria, Australia. For our latest Fuel Tank TV feature, we visit Dallas at the ranch to talk about work, bikes and moving out of the 'burbs of Melbourne...
Read More
In part four, Andy talks through the final stages of getting the chassis finished up and the body back on.
Read More
In part three, Andy runs us through the fabrication work that he's done to the car so far and lifts the body off to get started on the drivetrain.
Read More
In part two, Andy fabricates a lower quarter panel for the A Model. We see him go through various stages from cutting out the rusty panel through making a new panel and welding it in.
Read More
Last year I spent a bit of time on the west coast of LA. One of the folks I was lucky enough to spend some time with was Len Hig of Sleepers Speed Shop. As result of those couple of days with Len is this Fuel Tank TV double bill.
Read More
The car will be built for and driven to the 90th Anniversary of the Ford Model A in Gulgong, New South Wales in May, a 2000km round trip. In this series, we follow the build all the way to tagging along with Duncan and Andy on the.... Road to Gulgong.
Read More
As part of our Custom Craft series, Karl Stehn of KDS Designs shows us how he custom paints a motorcycle tank from the candy paint base coat to the artwork stage.
Read More!['One Street' Japan | Chopped VW Beetle & Honda Cub BMX Bikes [With Videos]](https://static1.squarespace.com/static/562ff836e4b05cda5f7ab9a5/5636e82fe4b06c8363f41110/5a77c43cc830259c53ece9a8/1517810292285/_RAY6865.jpg)
The last day of the 2017 Japan trip! I was to fly out that night but I had one last visit to make. Randomly browsing through social media, I discovered the page of Hajime Kamata of One Street Motorcycles. There were a couple of things about Kamata-san’s feed that peaked my interest; His rusty-look VW ‘Volksrod’ and some cute BMW-style motorised bikes that he was putting together.
Read More![Custom Craft | Ryan Whitling | Hand-Forming an Aluminium Fender Part Two [Video]](https://static1.squarespace.com/static/562ff836e4b05cda5f7ab9a5/5636e82fe4b06c8363f41110/5a2dc71a9140b7d491bf2415/1514539951551/Ryan+CC2a.jpg)
As part of our Custom Craft series, Ryan Whitling of RAW Fabrication & Design shows us how he hand-fabricates part of a front fender from start to finish.
Read More
In this feature, Bill talks about running his business and building this remarkable 1927 Ford Model T Roadster, twice... Once many years ago and then rebuilding it for the 2013 Detroit Autorama show where it was showered with accolades and praise.
Read More![Custom Craft | Karl Stehn | Applying Silver Leaf To A Bike Tank [video]](https://static1.squarespace.com/static/562ff836e4b05cda5f7ab9a5/5636e82fe4b06c8363f41110/5a1de8224192021369950896/1511909828218/KDS+01+Still.jpg)
As part of our Custom Craft series, Karl Stehn of KDS Designs shows us how he silver leafs a motorcycle tank from the design layout to the final execution.
Read More![Custom Craft | Ryan Whitling | Hand-Forming an Aluminium Fender Part One [Video]](https://static1.squarespace.com/static/562ff836e4b05cda5f7ab9a5/5636e82fe4b06c8363f41110/5a176c14e4966b134294a6a2/1511486951629/_RAY1573.jpg)